Ống Hợp Kim Kẽm 17 Inch 12v Chất Lượng Cao

  • 531,090đ 708,120đ
Mô tả:

Instruction on electric motor horn - this product is suitable for all types of vehicles with gas sources. - the operating current of the control relay must be greater than 10a. - relay main power wire cross section greater than or equal to 2.5mm 2. Output line is not less than 1.5mm 2. Negative (Iron bypass) Line should be in good contact, to ensure the use effect of this product. - horn gas source should be introduced directly from the cylinder., to achieve better sound quality: Gas tanks should be discharged regularly, influence the life of electromagnetic valves. - work pressure 0.3~0.9 mpa, jiao 0.42~0.68 mpa. - temperature adaptation ranges from-40~80 'c. - this product has more than 100,000 service life. Note points for use of electromagnetic valves: Magnetic valve gas pipe connections should be tightened carefully, filters can sometimes be blocked in use, cleaning should be done frequently, lest it affect the quality of sound. Instruction on electric motor horn - this product is suitable for all types of vehicles with gas sources. - the operating current of the control relay must be greater than 10a. - relay main power wire cross section greater than or equal to 2.5mm 2. Output line is not less than 1.5mm 2. Negative (Iron bypass) Line should be in good contact, to ensure the use effect of this product. - horn gas source should be introduced directly from the cylinder., to achieve better sound quality: Gas tanks should be discharged regularly, influence the life of electromagnetic valves. - work pressure 0.3~0.9 mpa, jiao 0.42~0.68 mpa. - temperature adaptation ranges from-40~80 'c. - this product has more than 100,000 service life. Common troubleshooting of car horns A car horn is a device used frequently when driving, if the horn fails, it will be very inconvenient when driving. Let 's see how the horn works first. When pressing the horn button down on the steering disk or elsewhere, the current from the battery flows through the loop to the electromagnetic coil of the horn relay, closure of the moving contact switch of electromagnetic coil attract relay, the current flows to the horn. Electric currents work on electromagnetics inside the horn, the vibration membranes are vibrating and sounded. In a lot of faults about horns, when problems arise, they are often faulty of the horn itself. In particular, there are defects in the location of the horns designed for some cars, it 's easy to wet the horn in rain, caused damage to the horn. Refer to the following steps when there is a failure. Sometimes the trumpet switch is not sounded, if the trumpet rings sometimes, sometimes it doesn 't sound, most of the contact points inside the horn switch are not in contact, some are also the horn itself 's problem. Sounds hoarse mostly due to poor contact with plugs, in particular, the contact points around the steering disk, due to frequent use, it 's easy to wear contact. Check the fuse at all to see if it is fused, then unpl